Título:	Microwave drying of yerba mate leaves: kinetics modeling and techno-economic analysis.
Autor:	ARANTES, M. S. T. DOMINGUES, L. H. P. HELM, C. V. MAGALHAES, W. L. E. SILVA, V. R. da
Afiliación:	MATHEUS SAMPONI TUCUNDUVA ARANTES, UNIVERSIDADE FEDERAL DO PARANÁ; LUÍZA HELENA PINTO DOMINGUES, UNIVERSIDADE FEDERAL DO PARANÁ; CRISTIANE VIEIRA HELM, CNPF; WASHINGTON LUIZ ESTEVES MAGALHAES, CNPF; VÍTOR RENAN DA SILVA, UNIVERSIDADE FEDERAL DO PARANÁ.
Año:	2024
Referencia:	Revista Observatório de la Economía LationoAmericana, v. 22, n. 2, .e3263, 2024.
Descripción:	Ilex paraguariensis, known as yerba mate, is a native species from South America widely used in the preparation of drinks, with several bioactive compounds. Its industrial drying process is archaic and associated to the contamination of the leaves with carcinogenic compounds. Previous study reported microwave drying of yerba mate as a potential alternative for its drying, but there are no studies on the techno or economic aspects of this process. Hence, this study aims to determine the drying kinetics on the yerba mate leaves (YML) using the microwave assisted drying method, and to provide a techno-economics analysis for different production and rate of return of investment scenarios. Microwave drying (MWD) of yerba mate was conducted at different powers (675, 945, and 1,215 W), and conventional kinetics models were fitted to the experimental data. A techno-economics analysis was conducted considering the processing of 10 – 100 kg YML/h in an agribusiness located in South Brazil. As results, the different microwave powers resulted in different equilibrium moisture content, and only the MWD at 1,215 W achieved Brazilian’s legislation requirement of 10 % of moisture (wet basis). Page’s drying kinetics model presented the best fitting to the experimental data, and its parameters were used in the study of economic viability. Finally, a required selling price of 19.88 US.
Thesagro:	Ilex Paraguariensis Secagem Custo de Produção
NAL Thesaurus:	Yerba mate Kinetics Production costs
Palabras clave:	Micro-ondas
Citación:	1696-8352
DOI:	https://doi.org/10.55905/oelv22n2-115
Tipo de Material:	Artigo de periódico
Acceso:	openAccess
Aparece en las colecciones:	Artigo em periódico indexado (CNPF)